Needless to say, no need for anechoic chambers to be surrounded by the rear-side air layer!
In general, the conventional construction methods for an anechoic chamber involve installing a “rear-side soun...
2024/07/04
MFAC
Needless to say, no need for anechoic chambers to be surrounded by the rear-side air layer!
In general, the conventional construction methods for an anechoic chamber involve installing a “rear-side soun...
2024/07/04
MFAC
Expectation vs. Reality in design methods for acoustic anechoic chambers based on ISO3745:2012
The design methods for anechoic chambers are specified in the International Standard, ISO 3745:2003 -Annex K3 ...
2024/07/02
The principle of mass does not serve as the basis for calculating sound insulation
To achieve soundproofing, heavy materials must be used. This is often said, but it is based on the principle o...
2024/07/02
VSAC
ISO 20908:2023 – Tyre sound emission test
ISO 20908:2023 – tyre sound emission test was published in 2023 as a method of indoor noise testing. ISO...
2024/07/02
Others
Introducing iwasemi™, a sound absorbing material developed by Pixie Dust Technology
This is our modular fully anechoic chamber that we delivered to Pixie Dust Technology (PxDT).PxDT is developin...
2024/07/02
MFAC
Benefits of Low Ambient Noise and Why It Can Be Detrimental
If you’re entering the field of acoustics, you’ve likely heard the term “ambient noise,̶...
2024/07/02
MFAC
Inverse Square Measurement System in an Anechoic Chamber
In an anechoic chamber, to verify the absorption characteristics (compliance with the inverse square law), mea...
2024/07/02
MFAC
Wind Tunnel Testing Facility + Anechoic Chamber
In recent years, projects combining wind tunnel testing facilities with anechoic chambers have been increasing...
2024/07/02
Others
Semi-Anechoic Chamber Exhaust System
When operating vehicles inside a semi-anechoic chamber, there is a challenge of exhaust emissions from the veh...
2024/07/02
MSAC
Heavy Duty Door Hinges
Sonora’s soundproof doors are quite heavy, so naturally, the hinges (or hinges) designed for these doors...